Save Costs With The DimLux Maxi Controller
- Simulates sunrise and sunset in indoor grow rooms.
- Using a DimLux with a Maxi Controller
- Able to switch up to 160 DimLux ballasts/lighting systems
- Regulates light output levels perfectly
- Easy to set-up
As one of the most developed pieces of grow room equipment available on the market, the DimLux Maxi Controller helps to regulate the lighting systems in your indoor grow room.
What is the DimLux Maxi Controller used for?
The DimLux Maxi Controller is fantastic for improving your grow room environment. This handy controller will regulate your DimLux lighting systems, removing any need for contactors or timers. This will also regulate the output levels to ensure you grow room has a perfect atmosphere all the time. The Maxi Controller will also take care of CO2 distribution and switch heaters and humidifiers on and off. Similarly, using the DimLux with a Maxi Controller allows you to plug directly into a wall socket without needing an intervening relay, time delay unit or timer switch. Therefore, saving you money over time.
Likewise, 1 Maxi Controller can control all ballasts to dim at the same time. This is useful for new crops. Where you can increase the light output by 10% on successive days. A maximum of 160 DimLux ballasts can be connected to the Controller.
Furthermore, the Maxi Controller can adjust the output according to the temperature. As a result, the lamps dim automatically when the temperature exceeds a maximum level. You may use the controller with an OptiClimate Maxi Controller for more functions. Likewise, the controller also helps to copy the natural habitat of plants as close to nature as possible. Plus, the Controller simulates sunrise and sunset to ensure your plants photosynthesise correctly.
How to use the DimLux Maxi Controller
The controller communicates with the DimLux ballasts or the light fixtures by the means of a signal cable, which connects between the controller and the various ballasts and light fixtures. As a result, the Controller regulates and operates the lighting, CO2, VPD status and any other connected components (AUX). The temperature sensor measures the room temperature and will need protecting against light. Whereas, the RH% sensor measures the relative humidity in the room. This is necessary to determine the VPD or to control a humidifier or a dehumidifier. Plus, the RH% sensor should also hang in the shade. You can read and control the current CO2 level in a room using a very accurate dual-beam CO2 sensor. Therefore, The sensor can control a CO2 generator or a cold CO2 installation. You can measure the temperature of a crop using the plant temperature camera.
- 1 x DimLux Maxi Controller
- 1 x Power supply – 1.8m cable
- Additional purchases needed to utilise the controller’s full feature set
There are no reviews yet.